Overview
A 14×24 rim that merely “fits” an 8-lug hub is not the same as one that seats concentrically. The most common after-treatment failure on mid-sized tractors is not rim fracture — it is vibration-induced tire sidewall fatigue and uneven lug wear, caused by PCD and center-bore tolerances that deviate from OEM specification. This rim is manufactured to precise OEM PCD and center-bore dimensions, so the wheel runs true from the moment it is torqued down. For a fleet operator or dealer, that translates directly into fewer comebacks and fewer warranty conversations.
Key Engineering Advantages
Concentric fitment, not approximate fitment. CNC-machined bolt holes and hub bore maintain PCD and center-bore tolerances that keep the tire’s contact patch consistent across the tread face. On a 40-90 HP utility tractor used for loader work and transport, that eliminates the low-frequency wheel-hop that accelerates bearing wear and cupping on the tire’s shoulder.
High-yield steel for torque-spike resistance. Agricultural tractor rims operate under high torque at low speed, with frequent direction changes and exposure to soil, moisture, and fertilizer chemicals. Standard carbon steel deforms under repeated loader-impact cycles; high-yield structural steel retains its geometry. The difference is not visible on a spec sheet — it becomes visible after two seasons of daily loader work.
Coating formulated for chemical exposure, not just appearance. The powder coat is selected for resistance to fertilizer and manure residue, not merely UV fade. For dealers reselling into livestock or row-crop operations, finish durability is a return-rate issue, not a cosmetic one.
Fitment Notes
Profile match is non-negotiable. This rim uses a W-profile bead seat. A DW-profile rim will not seat correctly on a tire designed for a W profile, and vice versa. Confirm the tire’s required profile before ordering.
Load rating verification above 80 HP. For tractors at the upper end of the range, or those operating with full ballast, verify that the rim’s rated load capacity meets or exceeds the maximum axle weight. This is the specification most commonly omitted from aftermarket listings — and the one that determines whether the rim survives a season of heavy draft work.
Best Suited For
Mid-sized utility tractors (40-90 HP) used in loader work, hay and forage operations, and general farm transport.
Specifications
Size: 14×24 / Profile: W / Bolt Holes: 8 / Material: High-yield structural steel / Finish: Industrial powder coat
Reviews
There are no reviews yet.